RECARO BASE FRAME SEAT RAIL LEFT SEAT FOR TOYOTA LAND CRUISER J70 76 79 NO SEAT SUSPENSION 2080.123.1

RECARO

BASE FRAME SEAT RAIL LEFT SEAT

2080.123.1

TOYOTA LAND CRUISER J70 76 79 NO SEAT SUSPENSION

Model year: 1984-11-2015-07
Special notes: The seating position is almost the same as the genuine seat (when using the center hole of ST-JJ). You may need to use a hole other than the genuine seat mounting hole (hidden under the floor carpet). (Note) Cannot be installed on overseas specification single cap vehicles (present on J75, J78, J79, including troop). (Note) When installing on the 70 limited edition model released in August 2014, we have found that there are vehicles with different hole positions on the floor due to individual differences in the vehicle and it cannot be installed. In such cases, please consult your dealer.
Notes / Interference information: For Trend-J, JJ, JC, D, DC, the backrest side and door armrest interfere by about 10 to 15 mm. For SR-1, 2, 3, 4, 5, Sport-J, JJ, JC, D, DC, the backrest side and door armrest interfere by about 5 to 10 mm. Please install the RMS after adjusting it to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter. If there is any interference with the interior, it can be alleviated by adjustment. Please install the RCS after adjusting it to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter.
Position: New structure frame. English: Choose from 3 height levels (For some car models, the legs of the slide rail may need to be cut depending on the installation position, so please test fit before installation.)
Armrest: Can be installed for right hand use on the left seat, and left hand use on the right seat
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base)
Classic LX Pepita / Classic LX Spektrum
LX-F (IS-05 base)
LS / LS-# / LT-#
Pro Racer RMS For the RMS, please adjust to the optimal position (front/back height, left/right offset 0/5/10mm) using the separately sold RMS side adapter . Also, if there is any interference with the interior, it can be alleviated by adjustment. New Orthoped (with Recaro vent)
RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter ・RCS stainless steel side adapter set SR-2 late model / SR-3 / SR-4 / SR-5 / SR-VF / SR-IMPACT / SR-IMPACT Pro
Rally Special / First generation SR / SR-2 early model
Late model A-8
Early model A-8
SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 You will need to purchase the side adapter set separately. SP-AN / SP-GN / SP-GN 2 SP-AN / SP-GN / SP-GN 2 require the separately sold SP-GN side adapter set (product number 1600110J). AM19 TREND-J/JJ/JC
AM19 STYLE-J/JJ/JC
AM19 SPORT-J/JJ/JC
AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
AM19 TREND-D/DC
AM19 STYLE-D/DC
AM19 SPORT-D/DC/MAGNIFICA CL222HV
TS-G / RS-G / TS-W / RS-W You will need to purchase the separately sold side adapter set (product number 1700000J). SP-X
SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Sportster
CrossSportster

(Note) This product cannot be installed on any seats other than those listed in the matching information below. For vehicles without seat suspension *Please make sure to check whether the vehicle has a seat suspension or not. (Note) This product cannot be installed on overseas single-cap vehicles (J75, J78, and J79 models, including the Toroup). (Note) When installing this product on the 70 limited edition model released in August 2014, we have found that there are vehicles with different hole positions on the floor due to individual differences in the vehicle, and that this product cannot be installed on some vehicles. In such cases, please consult your dealer.

Images are for illustration purpose only. Actual product may vary.