RECARO BASE FRAME SEAT RAIL RIGHT SEAT FOR HONDA FREED FREED+ GB7 GB8 HYBRID VEHICLES 2085.041.2

RECARO

BASE FRAME SEAT RAIL RIGHT SEAT

2085.041.2

HONDA FREED FREED+ GB7 GB8 HYBRID VEHICLES

Model year: 2016-09-2024-06
Special notes: The side airbag built into the factory seat will no longer function. Vehicles equipped with side airbags will need to have the airbag warning light turned off. If a non-SBR Recaro seat is installed on the passenger seat, the occupant detection sensor will no longer function and the seat belt warning light will no longer be on.
Notes / Interference information: For RS/TS-# series, the steering wheel offset can be adjusted in 5mm increments from 5mm to a maximum of 15mm using the RS/TS-G offset adapter set (product number 1700001J). For RMS, please adjust to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RMS side adapter before installation. In addition, if there is interference with the interior, it can be alleviated by adjustment. For RCS, please adjust to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. (When passenger seat is installed) When AM19 seats and SP-X are installed, the bottom of the seat interferes with the floor, so the lowest position of the 3 positions cannot be used. Also, the front of each seat interferes with the small item table on the center console.
Position: New structure frame. English: Choose from 3 heights (For some car models, the legs of the slide rail may need to be cut depending on the installation position, so please test fit before installation.)
Armrest: Can be installed for the right hand of the left seat, or the left hand of the right seat
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base)
Classic LX Pepita / Classic LX Spektrum
LX-F (IS-05 base)
LS / LS-# / LT-#
Pro Racer RMS For the RMS, please adjust to the optimal position (front/back height, left/right offset 0/5/10mm) using the separately sold RMS side adapter . Also, if there is interference with the interior, it can be mitigated by adjustment. New Orthoped (with Recaro vent)
RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter ・RCS stainless steel side adapter set SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 side adapter set must be prepared separately. SP-AN / SP-GN / SP-GN 2 side adapter set must be prepared separately. PRO RACER (RACER) SP-G/A side adapter set must be prepared separately. AM19 TREND-J/JJ/JC
AM19 STYLE-J/JJ/JC
AM19 SPORT-J/JJ/JC
AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
AM19 TREND-D/DC
AM19 STYLE-D/DC
AM19 SPORT-D/DC/MAGNIFICA CL222HV
TS-G / RS-G / TS-W / RS-W RS/TS-# series requires RS/TS-G offset adapter set (product number 1700001J). *Normal side adapter (product number 1700000J) cannot be used. SP-X
SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Sportster
CrossSportster

(Note) This product cannot be installed on any seats other than those listed in the matching information below. For hybrid vehicles. Gasoline vehicles are set separately. Side airbag canceller included for vehicles with side airbags. Compatibility with optional equipment has not been confirmed.

Images are for illustration purpose only. Actual product may vary.